SORVOLO D_05.

Design Living Room with TV Stand

The Sorvolo D_05 design living room with the FLAG TV stand combines elegance and functionality. Finishes in lava stone, random walnut, mink lacquer, and iron lacquer add a refined and modern touch to any living space. Perfect for those seeking sophisticated and contemporary furnishings, the Sorvolo D_05 is defined by innovative design and high-quality materials. Discover more about the collection and be inspired by the creativity and craftsmanship of Fimar furniture.

> TECHNICAL SHEET

> FINISHES

CONTACT US

Fill in the form below and we will get back to you as soon as possible.

Technical sheet

Sorvolo Day System

Technical notes on the storage units of the Sorvolo Day living system: 45-degree mitred carcase, recessed doors, drawers and opening systems.

Dimensions in cmDownload PDF

Carcase and doors

45-degree joints and recessed fronts.

45-degree modules

In modules with a 45 degree joint, the sides are mitred against the top and the base panel, which produces finished modules with no need for an additional finishing top.

A 3 mm groove is formed along the mitred edge: it strengthens the corner and keeps it from feeling sharp.

On floor-standing elements and suspended bases the 45-degree joint is only used on the upper part.

Recessed doors, 20 mm thick

The doors of the storage units have a 14 mm perimeter rebate, so that the closed front shows a slim 6 mm edge.

All round, the front is reduced by 5 mm per side with respect to the carcase.

The fronts of drop-down elements are flush with the structure along the lower edge.

At a glance

Carcase joint: sides, top and base mitred at 45°
Edge groove: 3 mmstrengthens the mitred corner
Finishing top: not requiredmodules are finished as they are
Doors: 20 mm thick, recessed
Perimeter rebate: 14 mm
Visible edge: 6 mmwith the front closed
Front reduction: 5 mm per side

45-degree joint
3 mm groove along the edge

Recessed doors, 20 mm
6 mm visible edge when closed

Drawers

Drawer box materials and runner systems.

Drawer box

The drawer box is made of 12 mm birch plywood stained light grey, with a 10 mm melamine bottom panel in a grey fabric effect.

The drawer is built on 4 sides with a screwed front, a solution that gives the element a longer life, as it is naturally subject to pulling forces and loads.

Runners

Drawers run on silent concealed runners with partial extension and soft-close, or on a push-to-open system.

Full-extension runners are available on request at extra cost.

At a glance

Drawer box: 12 mm birch plywoodstained light grey
Bottom: 10 mm melamine panelgrey fabric effect
Construction: 4 sides with screwed front
Runners: concealed, partial extensionsoft-close
Opening: soft-close or push-to-open
Full extension: on requestat extra cost

Drawer box and runners
12 mm birch plywood

Opening systems

Drop-down doors, hinged doors and push-pull.

Drop-down doors

Dedicated flat hinge. The adjustable stay gives the door a soft, damped opening.

Lift-up doors

Adjustable stay allowing a gradual, continuous opening up to the maximum opening point.

Hinged doors — hinges

Opening on hinges with a straight mounting plate, adjustable in height, width and depth.

Push-pull

Push-to-open piston fitted to the side panel (to the top or base panel on drop-down doors), which opens the door with a light push. The door carries a magnetic plate that prevents the piston from releasing accidentally. For correct operation we recommend a clearance of 3 to 5 mm between door and carcase.