The Sorvolo D_03 living room with a swivel TV stand is the perfect blend of modernity and functionality. Finishes in rust elm and mink lacquer add a touch of elegance and style to any living space. This piece is ideal for those seeking contemporary furniture that combines aesthetics and practicality. Discover more about the innovative design and quality of Fimar furniture..
Technical sheet
Technical notes on the storage units of the Sorvolo Day living system: 45-degree mitred carcase, recessed doors, drawers and opening systems.
01
45-degree joints and recessed fronts.
45-degree modules
In modules with a 45 degree joint, the sides are mitred against the top and the base panel, which produces finished modules with no need for an additional finishing top.
A 3 mm groove is formed along the mitred edge: it strengthens the corner and keeps it from feeling sharp.
On floor-standing elements and suspended bases the 45-degree joint is only used on the upper part.
Recessed doors, 20 mm thick
The doors of the storage units have a 14 mm perimeter rebate, so that the closed front shows a slim 6 mm edge.
All round, the front is reduced by 5 mm per side with respect to the carcase.
The fronts of drop-down elements are flush with the structure along the lower edge.
At a glance
02
Drawer box materials and runner systems.
Drawer box
The drawer box is made of 12 mm birch plywood stained light grey, with a 10 mm melamine bottom panel in a grey fabric effect.
The drawer is built on 4 sides with a screwed front, a solution that gives the element a longer life, as it is naturally subject to pulling forces and loads.
Runners
Drawers run on silent concealed runners with partial extension and soft-close, or on a push-to-open system.
Full-extension runners are available on request at extra cost.
At a glance
03
Drop-down doors, hinged doors and push-pull.
Dedicated flat hinge. The adjustable stay gives the door a soft, damped opening.
Adjustable stay allowing a gradual, continuous opening up to the maximum opening point.
Opening on hinges with a straight mounting plate, adjustable in height, width and depth.
Push-to-open piston fitted to the side panel (to the top or base panel on drop-down doors), which opens the door with a light push. The door carries a magnetic plate that prevents the piston from releasing accidentally. For correct operation we recommend a clearance of 3 to 5 mm between door and carcase.
Contact our technical department to check feasibility and quotations.
Finishes
The finishes available for this product. Hover a finish to see its name, click to enlarge it.
The shades shown are indicative only.